BIS IS 15958 : 2012

ISO 15403 :  2000

• API 618
• ISO 13631-2002
• OISD 179 -2016
• ASME B 31.3 -2016
• NFPA-37-2015
• NFPA-52: 2016
• NFPA-496-2017
• NFPA-68 -2013
• NFPA-70 -2017
• NFPA 12-2015
• ASME Sec IX
• Gas Cylinder rules-2018
• ANSI
• ASTM
• NEC
• NEMA
• Indian Electricity Rules
• Indian Explosives Act.
• Factories Rules

• OISD 142: IS 5572
• OISD 179, NFPA-52: 2006, NFP-496, NFPA-68, NFPA-70 or equivalent
• NFPA – 37, NFPA – 12- CO2 Flooding system
• IS: 6382
• IS: 325/ IEC or International standards. – Standards for electric Motor
• Applicable ANSI, ASTM, NEC, NEMA code
• API – 618/API 11 P
• EURO EAN NORM P.E.D., Italian NOR M D.P.R. 47/55
• EURO EAN NORM P.E.D , D.M. 24.5.02 – D.M. 2 8 .6.02
• M 2 4.11.84 parte prima – sez. II° , D.M . 24.5.02 – D.M. 28.6.02, DIN 2413, S AE J 514
• EURO EAN NOR MS, CEI N 60079- 0/CEI EN 60079-14/ CEI, EN 60204-1/ CEI EN 60439-1, ATEX
• STAN DARD API – 661 : Specifications for Air cooled exchangers
• ASME Section – VIII Div. – 1/2 Design codes for pressure vessels
• Gas Cylinder Rules 2018
• Standard Specifications of Bureau of Indian Standards (BIS)
• Specifications/Recommendations of IEC
• Indian Electricity Rules
• Indian Explosives Act
• State Factory Rules
• TEMA – C – Water cooled heat exchangers
• ASME / ANSI – B-31.3 Code for Process Piping
• DIN 2413-This standard covers the design of steel bends and bent pipes of circular cross section
• SAE J 514-Standard for CNG hydraulic tube fittings and O-ring
• CEI EN 60079-10-Classification of area for explosive gas atmosphere
• CEI EN 60079-14-Design, selection and installation of electrical systems for areas with potentially explosive atmosphere.
• CEI, EN 60204-1-Standard for safety of machinery — Electrical equipment of machine
• CEI EN 60439-1-Standard for safety of electrical equipment

ATEX-Standard for describing electrical equipment and work space is allowed in an explosive atmosphere.

• Gas Cylinder Rule 2018.
• Indian Explosives Act- 1884
• SMPV Rules 1981
• IS:7285-2004 part-2, amendment no. 4 with latest amendment.
• CNG Cylinder Valves, IS:3224-1979 (Amendments 1983,84,85,86,89,92,98),
• Hydrostatic Stretch Test, IS: 5844 – 1970.
• Safety Devices of Gas Cylinders, IS : 5903 -1970
• NFPA 52 Standards for CNG vehicular fuel systems & CNG Cylinder Codes IS: 7285-2004 part-2.
• OISD 179 Safety requirements for compression, storage, handling and refueling of CNG for use in automotive sector.
• SS tubing-ASME B31.3 in conjunction with EEMUA supplement to ASME B31.3
• Any Welding pipe-ANSI/ASME B31.3, API 1104
• SS tube-SS316L
• SS Tube & fitting-ASTM A269, ultimate tensile 517 Mpa
• Pressure Gauges-BS 1780 or ANSI/ASME B40.1 or OISD179
• Painting-SA 2 1/2,Swedish standard SIS-055909 or Indian Standard IS 9954/International Standard ISO 8501-1
• Mobile Cascade-Indian Standard 2825, IS :7285 – 1988 or BS5045:Part1 or (US) D.O.T 3AA
• Shock withstand-4G
• Calibration-ISO 5168
• Enclosure-IP65, NENA4x

Coming soon

Coming Soon

• Suitable to flow fluid as per ISO 15403:2000
• Hazardous area classification Class-I, Division I,
  Group D as per NEC or Zone I, Group II A/ II B as per IS/ IEC,
• NFPA-52
• NGV 4.1/ AGA 2-92
• NGV 4.2/ AGA 1-93
• ANSI / NGV1
• NGV4
• ASTM A269
• ANSI / EEE (EFT) C 62.41 (1991)
• EN 50081-1
• SAMA PMC31.1-1980 condition2
• IS: 5572
• 0ISD-179
• OISD 113
• IS: 5571
• CMRI
• PESO
• IP: 65
• AG901
• NZS5425
• IEC 79-1
• ISO 5168
• ASME/ANSI B 31.3
• OIML TC8/SC7
• Weights and measures Act 1976.
• Weights and measures (Enforcement) Act 1985.

ASTM A269